What Wattage Gobo Projector Do I Need?
The Gobo Projector you need depends on four things:
- the elements of the image / logo you want to project, mostly what colors and how bright it is
- how wide you want the image / logo
- the surface it projects on
- how much ambient light is present
Have your image or logo ready to upload. If you have an image of where you want to project, you can upload that as well to see a rendering.
Go through these quick steps below and we’ll recommend the right projector for your specific application.
Lets get started!
By Keith, Logo Light Store · Updated November 2026
Show us your logo
- Simple and bold works best. Thick lines, solid shapes and big lettering stay sharp. Tiny text and thin lines blur at a distance.
- Black means "no light." Black parts of your design block the light, so the surface shows through there.
- Light colors look brightest. White, yellow and light blue let the most light through. Navy, purple and maroon need a stronger projector.
- Best files: AI, EPS, PDF or SVG. A large, sharp PNG or JPG also works.
Upload your logo and we'll check how bright its colors are. You only upload it once. It will already be attached when you order.
Mixed colors? Pick the color that covers most of your logo. If you upload your logo, we'll weigh its colors for you.
How wide should your logo be?
- Measure the widest part of where you want the logo to appear. For a round logo, measure across the circle.
- Tip: mark the size on the floor or wall with painter's tape and look at it from where customers will stand.
- Most storefront and entry logos are 3 to 8 feet wide.
- Bigger isn't always better. The same light spread over a bigger area looks dimmer, so a bigger logo needs a stronger projector.
Measure across the widest part of the logo. For a round logo, use the diameter.
What will the logo shine on?
- Light, smooth, matte surfaces are best: white walls, light concrete, light tile.
- Dark surfaces absorb light. On a black floor or asphalt, the same projector looks much dimmer.
- Shiny floors can glare. Polished epoxy reflects some light away instead of back to people's eyes.
- Rough textures like brick or rough concrete soften fine details a little.
Light surfaces bounce light back toward people. Dark, rough, or shiny surfaces absorb or scatter it.
Tap the spot where your logo will shine. We'll check how light or dark it is.
Drag the logo to position it. Use the round corner dots and edge bars, or the sliders, to match the size and angle of your space.
Where will the logo be shown?
- A projector adds light on top of whatever light is already there. The darker the space, the more your logo stands out.
- Indoors: dim spaces like bars, restaurants and lobbies are ideal. Bright stores and gyms need more power.
- Outdoors: logos look best after dark. At dusk and dawn they are visible but softer.
- Daylight: no gobo projector can compete with direct sun.
Room lights and sunlight compete with your logo. Pick the closest match.
How far away will the projector mount?
- Measure from where the projector will be mounted to the surface the logo will land on.
- Lens ratios are easy: a 0.3:1 lens makes a logo 0.3 ft wide for every 1 ft of distance. At 10 ft away, that's a 3 ft logo.
- Mounting close? A wide lens (0.6:1 or 1.0:1) makes a bigger logo. Mounting far away? The long-reach lens (0.2:1) keeps it smaller and sharper.
- Aiming at a steep angle stretches the logo. Ask us about angle-corrected gobo artwork.
Measure from where the projector will hang to the wall or floor. If you have a few options, enter a range.
Logo width with each lens
Your recommended projector
- We combine your logo colors, your logo size and your surface to estimate how much light you need, then pick the smallest projector that delivers it.
- Compare brightness lets you see how a smaller or bigger projector would look.
- Room lighting matters too. Gobo projectors look best indoors or from dusk onward. They aren't visible in direct sunlight.
- The preview is a close approximation, not an exact photo.
Drag the logo to move it. Use Rotate logo to turn it, or Spin to see it rotate like the real projector.
✓ Your logo will already be attached on the product page.
Your results
Here's everything you chose. Pick what you'd like to do next.
Have an expert call me
We'll review your logo and your space, then confirm the right projector.
✓ Results sent. We'll be in touch shortly.
- Ready to buy? Open your recommended projector. Your logo is already attached to the order.
- Want a second opinion? Send your results and we'll review your logo and space, then call you to confirm the right setup. No obligation.
- Questions any time? Call or email us, and a real person will help.
© 2026 Logo Light Store. All rights reserved.
Questions? Call 678-986-8504 or talk to an expert.
Call or email us now for help
Have an expert call you
Send us your details and we’ll call to help you choose the right projector. No obligation.
Quick Education Guide: Choosing a Gobo Projector
Optional reading. You don’t need any of this to use the projector finder above. It’s here if you want to understand why it recommends what it does.
What wattage gobo projector do I need?
It depends on your logo size, logo colors, surface and lighting. A 6 ft logo on a white wall in a dim room needs about 100W. A 5 ft logo on a light sidewalk at night needs about 50W. The same 5 ft logo on dark carpet indoors needs about 200W, and a 10 ft logo on a white wall needs about 200W.
Find your logo width on the left, then read across to your surface. The table assumes a logo with medium colors such as red, orange, green or blue. Bright logos may need one size smaller; dark logos one size larger.
| Logo width | White or light wall | Light concrete or sidewalk | Rough concrete or brick | Black floor or carpet |
|---|---|---|---|---|
| 3 ft | 50W | 50W | 50W | 100W |
| 5 ft | 50W | 50W | 100W | 200W |
| 8 ft | 150W | 150W | 300W | 600W |
| 12 ft | 300W | 300W | 600W | 600W or more |
Why do my logo colors change how bright it looks?
A gobo projector shines light through your logo, so the colors act like filters. White, yellow and light colors let the most light through and look brightest. Dark colors like navy, purple or maroon block much more light and usually need one size larger projector. Black areas block all light.
- Simple, bold shapes and thick lines stay sharp. Very small text and thin lines can blur.
- Black-and-white logos project as white light, the brightest option.
- Best files are AI, EPS, PDF or SVG. A large, sharp PNG or JPG also works.
How big will my logo be?
With the standard 0.3:1 lens, your logo is about 0.3 ft wide for every foot between the projector and the surface. Mounted 10 ft away, the logo is about 3 ft wide. At 20 ft, it's about 6 ft wide. Optional lenses make it smaller (0.2:1) or bigger (0.6:1 and 1.0:1) from the same spot.
| Projector mounted | Long-reach0.2:1 | Standard0.3:1 | Wide0.6:1 | Extra-wide1.0:1 |
|---|---|---|---|---|
| 5 ft away | 1 ft | 1.5 ft | 3 ft | 5 ft |
| 10 ft away | 2 ft | 3 ft | 6 ft | 10 ft |
| 15 ft away | 3 ft | 4.5 ft | 9 ft | 15 ft |
| 20 ft away | 4 ft | 6 ft | 12 ft | 20 ft |
| 30 ft away | 6 ft | 9 ft | 18 ft | 30 ft |
Which lens do I need?
Most installs use the standard 0.3:1 lens. Choose a wide 0.6:1 or extra-wide 1.0:1 lens when the projector has to mount close to the surface but you want a big logo, such as under a low ceiling. Choose the long-reach 0.2:1 lens when the projector mounts far away and you want a smaller, sharper logo.
Does the wall or floor surface matter?
Yes. It's one of the biggest factors. White walls and light concrete reflect the most light back to people's eyes. Rough concrete and brick absorb some light. Asphalt, black floors and dark carpet absorb a lot. A 4 ft logo needs about 50W on a white wall but about 150W on dark carpet. Shiny epoxy floors can reflect light away and look uneven.
Does room lighting affect a gobo projector?
Yes. A projector adds light on top of the light already there, so the darker the space, the more your logo stands out. A 7 ft logo on a light floor needs about 100W in a dark bar, 100W in a dimly lit lobby, and 150W in a brightly lit store.
Can I project onto the floor or at an angle?
Yes. Floor and sidewalk logos are very common. The steeper the angle, the more the far edge of the logo stretches, so a round logo becomes an oval. Keep the projector as close to straight-on as you can, or ask us about angle-corrected artwork that lands in the right shape.
Do gobo projectors work outdoors and in daylight?
They work outdoors with a weatherproof projector, but even the most powerful gobo projectors can't overcome direct daylight. Logos are visible but softer at dusk and dawn, and look their best after dark. Indoors, bright lighting and sunlight through windows also wash out the logo, so those spaces need a stronger projector.
Can I see my logo on my building before I buy?
Yes. In the projector finder above, upload a photo of your storefront, wall or floor, or pick an example scene. Your logo is placed on it, and you can move, resize and angle it to match your space. Then download the mockup or send it to us with your results.
Real installs: what customers actually used
Each install lists the projector, logo width, mounting distance and surface, so you can compare with your own space.
About this guide. Written by Keith, founder of Logo Light Store, drawing on 20+ years of AV experience across live sound, control system programming, and hardware and software. Logo Light Store supplies gobo projectors and commercial lighting to bars, restaurants, gyms and retail businesses nationwide.